Concrete Tile Profiles for Davie Roofs
The Florida tile installation manual written by the FRSA and the Tile Roofing Industry Alliance groups tile by how far it rises off the roof. The three groups below follow that split.

Flat (Slate-Look) Concrete Tile
The manual counts any tile with less than 1/2 inch of rise as flat or low profile. HomeGuide notes flat tiles interlock and come smooth or with a rough texture that resembles wood shake.
- Example weight: Eagle lists its smooth flat Bel Air tile at about 970 lb per 100 sq ft installed
- Crack resistance: HomeGuide says flat roof tiles resist cracking better than barrel tiles
- Look: clean straight lines on hip roofs, without the wave of S-tile

Concrete S-Tile
S-tile is the wavy Spanish look. HomeGuide describes Spanish tile as interlocking barrel- or S-shaped pieces and prices it at $7 to $21 per sq ft installed. Under the manual's definitions, a tile with more than 1/2 inch of rise and a rise-to-width ratio of 1:5 or less is medium profile.

High-Profile Barrel-Style Concrete Tile
Tiles that rise more steeply than the medium band count as high profile. They give the deep barrel shadow of mission tile in concrete. HomeGuide prices barrel or mission tile at $7.50 to $23.50 per sq ft installed. True two-piece clay barrel is a different system, covered on the clay tile roofing page.

How Tiles Are Attached: Foam, Mortar or Fasteners
The manual lets tiles be secured "with nails, screws, foam/adhesive or mortar," sized to resist the wind load the building code calculates for the house. Each method has its own rules:
- Foam adhesive: polyurethane foam that bonds the tile to the underlayment. The manual says foam systems "require FBC Product Approval." DuPont's Tile Bond page, for example, lists Miami-Dade and Florida Building Code approval.
- Foam and roof pitch: from 2:12 up to 6:12, no added fasteners are needed. Above 7:12, every tile gets a fastener as well as the foam.
- Mortar: the code requires an approved premixed mortar tested to TAS 123, or a job-site mix the building official approves.
- Uplift test: adhesive-set and mortar-set tile get a TAS 106 field uplift test before the final inspection, and Davie's checklist asks for that test on adhesive-set tile.
The manual also warns against "mixing of systems," meaning underlayment, flashing and attachment parts that weren't designed together. Ask that your contract name one attachment method and its approval number.

Why Davie homeowners, HOAs and property managers call Davie Roofline
- One request goes to one independent roofer, not a list of five
- Ask for an inspection and a written scope before any deposit
- Ask to see the product approval (NOA) number for every material quoted
- Ask the roofer to name who pulls the Town of Davie permit
- Hold the final payment until Davie's final inspection passes
Tile Roofs in Broward's High-Velocity Hurricane Zone
Broward County sits in the Florida Building Code's High-Velocity Hurricane Zone (HVHZ), along with Miami-Dade. That shapes every tile roof in Davie:
Design wind
the code sets Broward's design wind speed (3-second gust) at 170 mph for typical homes (Risk Category II).Product approval
every roofing component and system must have "a valid and current product approval."Miami-Dade NOAs
Davie's roofing checklist asks for product approvals (NOAs) "obtained from point of purchase." The county's Product Control Section reviews test data from county-certified labs, and a first approval is valid for five years.Solid deck
all tile systems in the HVHZ go over solid sheathed decks.
You can search Miami-Dade's product approval database yourself to confirm that the tile, underlayment and adhesive on the quote are current. The permit steps for a re-roof are on the roof replacement page.
How Long a Concrete Tile Roof Lasts
The tile itself is rarely what fails first:
Tile lifespan
InterNACHI lists clay or concrete tile at 100+ years. HomeGuide gives 30 to 100+.Underlayment
HomeGuide notes that roof tiles usually outlast the underlayment below them, and suggests an inspection every 3 to 5 years or after damage.Lift and relay
replacing only the underlayment means removing the tiles, installing new underlayment and laying the original tiles back. HomeGuide puts underlayment replacement at $0.75 to $4.00 per sq ft. The method is on the tile underlayment page.
Insurers also look at tile roof age. Citizens' documentation rule for older hard roofs is explained on the roof certification page. Cracked or slipped tiles before then are a repair job: see tile roof repair.
