Mobile Home Roof Options in Davie

Metal Roof-Over with Insulation
Metal is the priciest roof-over and lasts the longest. HomeGuide's ranges:
- Cost: $2,500 to $19,200 on a single-wide and $5,000 to $32,000 on a double-wide.
- Lifespan: 30 to 80 years.
- Insulation: $0.50 to $3.50 per sq ft for mobile home roof insulation.
- Material: HomeGuide calls aluminum a popular choice for mobile homes.
A framed, pitched roof built over the home is a different job from a covering laid on the existing roof, and Florida's rule for roof-overs is in the rules section below. Ask which kind your quote describes.

TPO or Rubber Membrane Roof-Over
HomeGuide says rubber membranes and metal are the best fit for flat mobile home roofs. It prices TPO and EPDM rubber alike, at $2,000 to $12,000 for a single-wide and $4,000 to $20,000 for a double-wide; its TPO guide lists $1,200 to $4,000 for a mobile home. TPO lasts 10 to 25 years and EPDM 15 to 25. HomeGuide adds that most contractors steer away from asphalt shingles for flat mobile home roof-overs because of the weight.

Elastomeric or Aluminum Roof Coating
HomeGuide ranks liquid coating with shingles as the most affordable mobile home roof options. HomeGuide puts it at $0.50 to $4.50 per sq ft, or $250 to $5,400 for a single-wide and $500 to $9,000 for a double-wide. It names elastomeric-acrylic blends and liquid rubber as the best fits. For metal roofs, its coating guide also lists aluminum-based blends and silicone. Decking with water damage, dry rot or sagging needs repair or replacement instead, at $2 to $5 per sq ft.

Seam, Vent and Edge Repairs
HomeGuide notes that extensive damage may call for a roof-over or full replacement. Smaller problems are priced as repairs:
- General repair: $5 to $15 per sq ft, or $150 to $1,000.
- Vent and skylight flashing: $200 to $500.
- Soffit and fascia: $9 to $34 per linear foot.
HomeGuide also says mobile home roofs need vents to keep heat and moisture from building up.

Why Davie homeowners, HOAs and property managers call Davie Roofline
- One request goes to one independent roofer, not a list of five
- Ask for an inspection and a written scope before any deposit
- Ask to see the product approval (NOA) number for every material quoted
- Ask the roofer to name who pulls the Town of Davie permit
- Hold the final payment until Davie's final inspection passes
Florida and HUD Rules for Manufactured Home Roofs
Wind zone
HUD's construction standard puts Broward County in Wind Zone III, with a 110 mph design wind speed for homes built to that zone (24 CFR 3280.305). Site-built homes are designed under the Florida Building Code, which states its wind speeds on a different basis (a 3-second gust), so the two figures don't compare directly; the tile roofing page gives the code figure.Repairs
Florida Rule 15C-2.0081 says repairs can't be held to a stricter standard than the home was built to, and must use equivalent material and design.Roof-overs and additions
they must be free standing and self-supporting, and built to state and local codes.Insurance
Citizens requires a four-point inspection for mobile home applications on homes more than 20 years old. The roof certification page covers what insurers ask for.
Getting a Mobile Home Roof Quoted
Two practical points from HomeGuide: narrow park roads can make it hard to get a roofing truck in, which adds labor, and you should get a written estimate before work begins. Ask the roofer whether your job needs a Town of Davie permit; the roof replacement page explains how Davie roof permits work. For flat roofs on site-built homes, see flat roofing.
