Davie Roofline logo
Stucco hip-roof house halfway through a tile re-roof, with black self-adhered underlayment on one side and new terracotta barrel tile stacked along the ridge

Roof replacement and repair referrals · Davie, FL

Metal Roofing in Davie, FL

  • Florida average: $7,100 to $38,000 for a metal roof, with standing seam at the top (HomeGuide)
  • Per sq ft installed: $5 to $16, from exposed-fastener panels up to standing seam
  • Install time: 2 to 5 days for most homes
  • Lifespan: 30 to 80+ years; corrugated metal in humid climates nearer 30 to 50

Davie Roofline books you a visit from a metal roofing contractor in the Davie area who can measure the roof and price the panel you have in mind. Every price on this page is a cost-guide figure, useful for comparing bids but never a substitute for one. Metal roofs differ mostly in how the panels are fastened, so the types below are grouped that way.

Get a free roofing estimate

Free for homeowners, HOAs and property managers. One local contractor contacts you.

Metal Roof Types for Davie Homes

Five choices come up when you price a metal roof. They differ in fastening, look and cost.

Long standing seam metal panels in light gray on a single-story hip roof with royal palms

Standing Seam Panels

Standing seam uses concealed fasteners instead of screws through the panel face. HomeGuide puts it at $9 to $16 per sq ft installed, or $13,500 to $40,000. Concealed fasteners cost more but sit out of the weather. Seam types, gauges, clips and paint finishes are on the standing seam metal roof page.

White 5V crimp metal roof panels with rows of screw heads on a block house

5V Crimp Panels

HomeGuide lists 5V crimp as one style of corrugated panel, fastened with screws through the face. One maker's Miami-Dade NOA for a 26-gauge 5V panel shows what an NOA lists. That NOA's expiration date was 08/21/26, so check the expiry date on any NOA a quote cites:

  • Panel size: 26 inches wide with 24 inches of coverage and a 3/8-inch rib
  • Fasteners: #9-15 self-drilling hex-head screws with sealing washers
  • Re-roof deck: plywood at least 15/32 inch thick
  • Gauges sold: one maker lists 24, 26 and 29 gauge in Galvalume

HomeGuide groups 5V with corrugated panels at $5 to $12 per sq ft installed, the low end for metal, and says they need more upkeep because of the exposed fasteners.

Stone-coated steel roof in a terracotta barrel-tile profile on a stucco ranch house

Stone-Coated Steel Tile and Shake

Stone-coated steel is steel panels with a granular stone finish, shaped to look like shingle, shake or clay tile.

  • Cost: $700 to $1,300 per 100 sq ft installed (HomeGuide)
  • Weight: DECRA lists 150 to 160 lb per 100 sq ft installed for its tile profiles
  • Install: DECRA says its Spanish Tile goes directly on the roof deck and lists TAS 125 High-Velocity Hurricane Zone wind testing

It is one answer when you want a tile look without concrete tile's weight.

Ribbed galvanized metal roof on a detached workshop beside a live oak

Exposed-Fastener Ribbed Panel for Outbuildings

Ribbed panels with screws through the face are the budget metal roof. HomeGuide lists:

  • Installed cost: $500 to $1,200 per 100 sq ft
  • Common use: galvanized or Galvalume corrugated panels are popular for sheds
  • Trade-off: exposed fastener roofs wear faster because each screw is a penetration open to the weather

Barns, run-in sheds and covered arenas get their own page: barn roofing.

Two metal roof panel samples, one bright aluminum and one matte Galvalume, resting on a sawhorse

Aluminum vs Galvalume Steel

Most residential metal roofs are aluminum, Galvalume steel, steel or copper. The first two compare like this:

  • Aluminum: $700 to $1,700 per 100 sq ft installed. HomeGuide calls it the best material for coastal areas because it resists corrosion.
  • Galvalume: $500 to $1,300 per 100 sq ft installed. It is steel coated with aluminum, zinc and silicon, popular in non-coastal areas.

Ask whether the panel warranty has any terms about distance from salt water, and get the answer in writing.

Gloved hands lifting a terracotta barrel tile beside a metal valley flashing on a tile roof

Why Davie homeowners, HOAs and property managers call Davie Roofline

  • One request goes to one independent roofer, not a list of five
  • Ask for an inspection and a written scope before any deposit
  • Ask to see the product approval (NOA) number for every material quoted
  • Ask the roofer to name who pulls the Town of Davie permit
  • Hold the final payment until Davie's final inspection passes

Get a free roofing estimate

Free for homeowners, HOAs and property managers. One local contractor contacts you.

Metal Roof Approvals and Underlayment in Broward

Davie is in the High-Velocity Hurricane Zone (details on the tile roofing page), so the metal panel needs its own product approval like any other roofing component. The 5V NOA above, for example, says a copy of the entire NOA must be available at the job site for the building official.

For metal roofs in that zone, the code gives underlayment options such as:

  • a self-adhering ASTM D1970 membrane over the entire deck, or
  • two layers of ASTM D226 Type II, D4869 Type III or IV, or D8257 underlayment.

Ask which option the quote uses. HomeGuide's question list for metal roofs includes "What type of underlayment do you use? Is underlayment included in the estimate?"

Metal Roof Upkeep and Repairs

Metal roofs need little routine work, but they aren't maintenance-free:

  • Minor repairs

    $200 to $600 to reseal or patch small holes (HomeGuide)
  • Partial replacement

    $500 to $1,500 or more per 100 sq ft
  • Color match

    HomeGuide lists matching color for repairs as a known drawback
  • Exposed screws

    expansion and contraction can let water in around exposed fasteners over time

Leaks around vents and flashing on any roof type are on the roof leak repair page, and smaller fixes on the roof repair page.

Frequently asked questions

Is a 5V roof the same as standing seam?

No. A 5V crimp panel is held down with screws driven through the face of the panel, each with a sealing washer. Standing seam uses concealed fasteners. HomeGuide says the hidden type lasts longer with less upkeep. Prices for both are in the type sections below.

We want the tile look but not the weight. What are the options?

Stone-coated steel is one option: steel shaped like tile, much lighter than concrete. Its weight and cost are in the stone-coated section below. Ask for the product's Miami-Dade approval number.

Should we pick aluminum or Galvalume for a house in Davie?

HomeGuide calls aluminum the best material for coastal areas because it resists corrosion, and says Galvalume is popular away from the coast. Aluminum costs more; the price ranges and the warranty question to ask are in the aluminum vs Galvalume section below.

Can a small dent or leak in a metal roof be fixed, or does the panel go?

Often fixed. HomeGuide puts minor resealing or patching at $200 to $600, and partial replacement at $500 to $1,500 or more per 100 sq ft. The weak spot is the look: it notes metal is hard to color-match for repairs, so a replaced panel may stand out. Ask whether the maker still sells your panel and color.

Ready to get started in Davie?

Request a free estimate