Davie Roofline logo
Stucco hip-roof house halfway through a tile re-roof, with black self-adhered underlayment on one side and new terracotta barrel tile stacked along the ridge

Roof replacement and repair referrals · Davie, FL

Gutter Installation in Davie, FL

  • Installed cost: $12 to $25 per linear foot, or $2,200 to $5,000 for an average home, per HomeGuide
  • A 2,000 sq ft house: about 180 feet of gutter, typically $2,200 to $4,500
  • Time on site: 1 to 2 days for most homes; a simple single-story job can be done in 4 to 6 hours
  • Code minimum: eaves under 6 inches deep need gutters

Davie Roofline links your gutter job with an independent contractor; ask them to check the roof edge and fascia the gutters hang from while they measure. The prices above are national guide ranges, and only a written bid for your house gives the real number. Below are the gutter choices, the Florida code lines and the questions worth asking.

Get a free roofing estimate

Free for homeowners, HOAs and property managers. One local contractor contacts you.

Gutter Types and Add-Ons for Davie Homes

Five choices come up on most gutter bids.

Installer seen from behind feeding a white aluminum coil through a gutter-forming machine on a trailer in a driveway

Seamless Aluminum K-Style Gutters

Seamless gutters are formed on site by a machine that rolls a flat coil into one continuous length for each run of roof edge. HomeGuide's numbers:

  • Aluminum or steel seamless: $6 to $20 per linear foot installed
  • Premium over sectional gutters: $3 to $5+ per foot, for fewer seams and fewer leaks
  • Size: most homes use 5-inch K-style; 6-inch gutters for heavy rain or big roofs add $1 to $2 per foot
  • Life: HomeGuide gives aluminum 20 to 30 years
Half-round aluminum gutter with a round downspout on the corner of a white stucco house with a clay barrel tile roof

Half-Round Gutters

Half-round gutters are the rounded alternative to the standard K-style profile. HomeGuide says they add $1 to $2 per linear foot over K-style because they take specialized installation. If you want round downspouts to match, HomeGuide prices them at $2 to $8 per foot for material against $1 to $3 for rectangular ones.

Rectangular aluminum downspout on a stucco wall ending in an extension that carries water across the lawn away from the house

Downspouts: Count, Size and Where They Drain

Downspouts decide how fast a gutter empties in a summer downpour. From HomeGuide:

  • Most homes need 4 to 5 downspouts, or one every 30 to 40 feet
  • Smaller gutters need more downspouts; larger gutters need fewer
  • Installed price is $30 to $75 each, and larger or decorative styles run up to $8 per foot for material
  • Splash blocks or extensions add $10 to $50 per downspout

The Florida Building Code says downspouts have to discharge at least 1 foot from the wall, through underground pipe, tail extensions or splash blocks. The code puts that rule under protection against decay and termites.

Concrete S-tile roof edge overhanging a new white seamless gutter on a single-story home, palm trees behind

Gutters on Tile Roofs

On a tile roof the gutter has to fit under tile that sticks out past the drip edge. Broward is in the High-Velocity Hurricane Zone, where the code sets that overhang at 3/4 inch to 2 inches and requires gutters to meet RAS 111, the code's standard for perimeter edge metal. HomeGuide adds that rotted fascia must be fixed before new gutters go up, because a soft board can't hold them. Ask how the hangers will be fastened without lifting or cracking the first course of tile.

Close view of a fine stainless micro-mesh guard on top of an aluminum gutter with a few palm fronds resting on it

Gutter Guards

Guards keep leaves and seed pods out of the trough. HomeGuide prices professionally installed guards at $3,000 to $9,000 for 200 linear feet, with labor alone at $3 to $20+ per foot. Two common types:

  • Micro-mesh: $2.00 to $5.00 per foot for material, suited to warmer climates and small debris, 3 to 10+ years
  • Reverse curve (surface tension): $3.50 to $10.00 per foot, for roofs with mild to moderate slope, 10 to 20+ years

HomeGuide also warns that some guards only work with certain roof types, so check the guard against a tile edge before you buy.

Gloved hands lifting a terracotta barrel tile beside a metal valley flashing on a tile roof

Why Davie homeowners, HOAs and property managers call Davie Roofline

  • One request goes to one independent roofer, not a list of five
  • Ask for an inspection and a written scope before any deposit
  • Ask to see the product approval (NOA) number for every material quoted
  • Ask the roofer to name who pulls the Town of Davie permit
  • Hold the final payment until Davie's final inspection passes

Get a free roofing estimate

Free for homeowners, HOAs and property managers. One local contractor contacts you.

Florida Code Lines for Gutters and Downspouts

Gutters aren't optional on every house. The Florida Building Code requires gutters with downspouts on any building whose eaves project less than 6 inches, except at gable rakes and on a roof that drains onto another roof.

Inside the High-Velocity Hurricane Zone, the code adds:

  • Gutters have to comply with RAS 111
  • Gutters, leaders and downspouts are sized and discharged under the Florida Building Code, Plumbing and ASCE 7, Chapter 8
  • The edge metal has to nail into solid wood at every eave

HomeGuide says permits and local code requirements can add $50 to $200 to a gutter job. We couldn't find a published Town of Davie rule that does or doesn't require a permit for gutters alone, so ask the contractor and have the answer written into the quote.

Questions for the Gutter Quote

A short list that keeps two bids comparable:

  • Fascia

    what's the per-foot price if boards need replacing? (Fascia work is on the soffit and fascia page.)
  • Old gutters

    is removal and disposal included? HomeGuide puts it at $50 to $200.
  • Size and count

    5-inch or 6-inch, and how many downspouts, placed where?
  • Discharge

    where does each downspout empty?
  • Color

    custom color matching runs $1 to $4+ per foot.

If the roof itself is due, put the gutters in the same contract so they go up after the new edge metal. For the re-roof itself, see roof replacement.

Ready to get started in Davie?

Request a free estimate